Multitech MTCMR-E1 Manual de usuario descargar pdf (Pagina 45)

Part 1 – AT Commands for All Universal IP Devices

Universal IP AT Commands Reference Guide 45

Set Commands

#PERSISTENTSOCKET - Persistent Socket

Description: If enabled and the physical connection is present, a socket will be created automatically.

This command is for all devices except the SocketEthernet IP (MT100SEM-IP).

Syntax: AT#PERSISTENTSOCKET=<Persistentsocket value>,<Result Codes>

AT#PERSISTENTSOCKET? Read or display the current setting (or AT#VALL ).

Values: 0 – Persistent socket is disabled

1 – The TCP originate is started (#OTCP=1)

2 – The TCP listener is started (#LTCPSTART=1)

3 – The UDP originate is started (#OUDP=1)

4 – The UDP listener is started (#LUDPSTART=1)

Result Codes: 0 – All result codes will be suppressed during socket connection/disconnection

1 – All result codes will be displayed during socket connection/disconnection

Defaults: 0,1

Example: AT#PERSISTENTSOCKET=1,0

#UDPPACKETMIN – UDP Client Transmit Packet Minimum Size

Description: This parameter determines the minimum packet size the UDP Client will transmit.

This command is for all devices except the SocketWireless Wi-Fi (MT810SWM-IP).

Note: This value cannot be larger than the internal maximum UIP UDP payload size.

Syntax: AT#UDPPACKETMIN=<parameter1>

AT#UDPPACKETMIN? Read or display the current setting.

Values: 0-65535 – the size of the packet in bytes; a setting of 65535 will allow the min packet size

allowed by the UIP stack

Responses: \r\n#UDPPACKETMIN: VALUE\r\n

\r\nOK\r\n

\r\nERROR\r\n

Examples: send: AT#UDPPACKETMIN=300\r

reply: \r\nOK\r\n

send: AT#UDPPACKETMIN?\r

reply: \r\n#UDPPACKETMIN: 300\r\n

reply: \r\nOK\r\n

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 118 119

Sin comentarios

Multitech MTCMR-E1 Manual de usuario Pagina 45