Multitech MTCMR-E1 Manual de usuario descargar pdf (Pagina 87)

Part 4 – AT Commands for the SocketModem iCell, SocketModem IP, and MultiModem iCell

Universal IP AT Commands Reference Guide 87

#AUTOCONNECT – Automatically Connect the PPP Link

Description: #AUTOCONNECT enables/disables the automatic link connection. The APN or ISP values need to

be set correctly.

Syntax: AT#AUTOCONNECT=<value>

AT#AUTOCONNECT? Read or display the current setting (or AT#VALL).

Values: 0 – AUTOCONNECT disabled

1 – AUTOCONNECT enabled

Default: 0

#PPPMODE – Set TCP/IP Behavior

Description: The TCP/IP stack can manage the access layer in different ways. This parameter selects the way

the TCP/IP stack must run once the physical is layer successfully established.

Syntax: AT#PPPMODE=<value>

AT#PPPMODE? Read or display the current setting (or AT#VPPP, AT#VALL).

Values: 3 – Standard PPP. The TCP/IP stack behaves as a PPP client for outgoing calls and as a PPP client

for incoming calls.

Default: 3

#PPPMYIP – Set IP Address When Using PPP

Description: When the TCP/IP stack behaves as a PPP server (according to the PPPMODE parameter setting),

it is in charge of the IP address attribution mechanism.

Once the PPP authentication is successfully achieved, the remote PPP peer asks the TCP/IP stack

for an IP address. Then the related PPP layer, called IPCP, suggests an IP address to the peer that

has been previously stored in the TCP/IP stack parameters. If the remote accepts this address,

the IP link is then established.

This parameter defines the IP address to be attributed to the TCP/IP stack when the PPP Server

mode is running.

Syntax: AT#PPPMYIP=<value>

AT#PPPMYIP? Read or display the current setting (or AT#VPPP, AT#VALL).

Values: 32-bit number in dotted-decimal notation (i.e., xxx.xxx.xxx.xxx).

Default: 0.0.0.0

#PPPPEERIP – Set IP Address for Remote PPP

Description: When the TCP/IP stack behaves as a PPP server (according to the PPPMODE parameter setting),

it is in charge of the IP address attribution mechanism.

Once the PPP authentication is successfully achieved, the remote PPP peer asks the TCP/IP stack

for an IP address. Then the related PPP layer, called IPCP, suggests an IP address to the peer that

has been previously stored in the TCP/IP stack parameters. If the remote accepts this address,

the IP link is then established.

This parameter defines the IP address to be attributed to the remote PPP peer when the PPP

Server mode is running.

Syntax: AT#PPPPEERIP=<value>

AT#PPPPEERIP? Read or display the current setting (or AT#VPPP, AT#VALL).

Values: 32-bit number in dotted-decimal notation (i.e., xxx.xxx.xxx.xxx).

Default: 0.0.0.0

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 118 119

Comentarios a estos manuales

Sin comentarios

Multitech MTCMR-E1 Manual de usuario Pagina 87

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Multitech MTCMR-E1