Multitech MTCMR-E1 Manual de usuario descargar pdf (Pagina 71)

Part 3 – AT Commands Wi-Fi Devices Chapter 13 – WLAN AT Commands for the SocketWireless Wi-Fi

Universal IP AT Commands Reference Guide 71

#WLANCONNECT – Connect with AP

Description: Connects the module with AP.

Syntax: AT#WLANCONNECT

Values: None

Example: AT#WLANCONNECT

SSID : WestConfRoom

RSSI : -52

Network : BSS

Security : No Enc

Capability : 0x1

Channel : 5

WLAN Mode : B Mode

BSSID : 00:13:D3:7B:A3:6A

#WLANDISCONNECT – Disconnect with AP

Description: Disconnects the module with AP.

Syntax: AT#WLANDISCONNECT

Values: None

Example: AT#WLANDISCONNECT

#WLANENABLE – Auto Connect Module with AP

Description: On power up, this parameter determines whether to connect to the AP automatically or

manually. Connection to the AP can be established by AT#WLANCONNECT command. A value of

0 means the module will not connect to AP automatically. A value of 1 means that on power up

the module tries to connect to the AP for configured settings.

Note: The module must be reset to put the command into effect.

Syntax: AT#WLANENABLE=<value>

AT#WLANENABLE? Read or display the current setting.

Values: 0 - Manual connection to the AP

1 - Automatic connection to the AP

Default: 0

#WLANDOZE= – Moves Module into or out of Power Save

Description: This command moves the module into or out of Power Save during an active connection.

Syntax: AT#WLANDOZE=

AT#WLANDOZE? Read or display the current setting.

Values: 0 - Power active mode

1 - Power doze mode

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 118 119

Sin comentarios

Multitech MTCMR-E1 Manual de usuario Pagina 71