Multitech MTCMR-E1 Manual de usuario Pagina 66

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 119
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 65
Chapter 11General AT Commands
66 Universal IP AT Commands Reference Guide
#BOOTMSG Enable/Disable Boot Message
Description: Enables/disables the boot message.
Syntax: AT#BOOTMSG=<0,1>
AT#BOOTMSG? Read or display the current setting.
Values: 0 - Disable
1 - Enable
Default: 1
Examples: AT#BOOTMSG?
0
OK
AT#BOOTMSG=1
OK
AT#BOOTMSG?
1
OK
AT#BOOTMSG=0
OK
#WATCHDOG Enable/Disable Watchdog
Description: Enable/disable Watchdog for the system reset on HANG.
Note: The module must be reset to put the command into effect.
Syntax: AT#WATCHDOG=<0,1>
AT#WATCHDOG?
Values: 0 - Disable Watchdog
1 - Enable Watchdog
Default: 1
Example: AT#WATCHDOG?
1
OK
#WATCHDOGTIMER Watchdog Timer
Description: Sets the Watchdog timer in milliseconds.
Note: The module must be reset to put the command into effect.
Syntax: AT#WATCHDOGTIMER=<value>
AT#WATCHDOGTIMER? Read or display the current setting.
Values: Maximum milliseconds that can be entered is 7000
Default: 1000ms
Example: AT#WATCHDOGTIMER?
4000
OK
Vista de pagina 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 118 119

Comentarios a estos manuales

Sin comentarios