Multitech MTCMR-E1 Manual de usuario descargar pdf (Pagina 23)

Part 1 – AT Commands for All Universal IP Devices

Universal IP AT Commands Reference Guide 23

#SMTPPW – Set SMTP Password

Description: Some SMTP servers use an authentication process when sending emails. In these cases, the

TCP/IP stack software provides the SMTP password (associated to the SMTP user name) for the

email sending process.

If this parameter is an empty string, the authentication mode is inactive.

If both this parameter and the SMTPUN parameter are not empty, the authentication mode is

active.

Syntax: AT#SMTPPW="<value>"

AT#SMTPPW? Read or display the current setting (or AT#VSMTP, AT#VALL).

Values: Alphanumeric ASCII text string up to 64 characters.

Default: No default.

#SMTPSERV – Set SMTP Server Address

Description: To send email messages the TCP/IP stack software must know the address of the SMTP server

that is to be used. In most cases, the local ISP maintains the SMTP server.

Syntax: AT#SMTPSERV="<value>"

AT#SMTPSERV? Read or display the current setting (or AT#VSMTP, AT#VALL).

Values: 32-bit number in dotted-decimal notation (i.e., xxx.xxx.xxx.xxx) or

Alphanumeric ASCII text string up to 120 characters if DNS is available.

Default: No default.

#SMTPUN – Set SMTP User Name

Description: To send email messages, some SMTP servers use an authentication process. In these cases, the

TCP/IP stack software will provide the SMTP user name (associated with a SMTP password) for

the email sending process.

If this parameter is an empty string, the authentication mode is inactive. If both this parameter

and the SMTPPW parameter are not empty, the authentication mode is active.

Syntax: AT#SMTPUN="<value>"

AT#SMTPUN? Read or display the current setting (or AT#VSMTP, AT#VALL).

Values: Alphanumeric ASCII text string up to 64 characters.

Default: No default.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 118 119

Sin comentarios

Multitech MTCMR-E1 Manual de usuario Pagina 23