Multitech MTCMR-E1 Manual de usuario Pagina 99

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 119
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 98
Part 6 AT Commands for GPS-Enabled Device
Universal IP AT Commands Reference Guide 99
#GPSGPVTG Enable/Disable GPVTG Message
Description: This command enables or disables the reporting of NMEA GPVTG messages.
Syntax: AT#GPSGPVTG=<value>
AT#GPSGPVTG? or AT#VGPS or AT#VALL
Values: 0 - Disable
1 - Enable
Default: 0
Responses: OK
Otherwise ERROR
#GPSINTERVALLOC GPS Local Transmission Interval
Description: This command sets the interval of time between messages transmitted to the local port.
Syntax: AT# GPSINTERVALLOC =<value>
AT# GPSINTERVALLOC? or AT#VGPS or AT#VALL
Values: 0 to 65535 (seconds)
Default: 0 (Disabled)
Responses: OK
Otherwise ERROR
#GPSGETMESSAGE Get Queued GPS Message
Description: This command gets the current queued GPS message. The response depends on which
messages have been enabled.
Syntax: AT#GPSGETMESSAGE
Responses: #GPSGETMESSAGE:
<enabled NMEA messages with prefix and urais>
OK
Vista de pagina 98
1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 118 119

Comentarios a estos manuales

Sin comentarios