Multitech MTCMR-E1 Manual de usuario descargar pdf (Pagina 79)

Part 4 – AT Commands for the SocketModem iCell, SocketModem IP, and MultiModem iCell

Universal IP AT Commands Reference Guide 79

These commands are for the following products

● SocketModem iCell (MTSMC-G2-IP)

● SocketModem iCell (MTSMC-C1-Nx-IP)

● SocketModem IP (MT5692SMI-IP) when used in IP mode

● MultiModem iCell (MTCMR-xx-xx) when used in IP mode

Set Commands

+WOPEN – Set IP Mode or Modem Mode

Description: This command sets the mode of operation.

Syntax: AT+WOPEN=<value>

AT+WOPEN? (Displays the current mode of operation).

Values: 0 – Modem Mode

1 – IP Mode

Note: If you set +WOPEN=1, do not set S0=1 as it will keep the device from transmitting.

For H5 devices: Setting +WOPEN=0 returns ERROR. Users cannot turn off the stack to talk

directly to the modem.

Default: 1

#AUTHENT – Authentication Type

Description: This command sets the PPP authentication type: PAP, CHAP, or NONE.

Syntax: AT#AUTHENT="<value>"

AT#AUTHENT? (Displays current PPP authentication type).

Values: PAP

CHAP

NONE

Default: NONE

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 118 119

Sin comentarios

Multitech MTCMR-E1 Manual de usuario Pagina 79