Multitech MTCMR-E1 Manual de usuario descargar pdf (Pagina 58)

Chapter 9 – Auto Discovery AT Commands

58 Universal IP AT Commands Reference Guide

Note: Auto Discovery broadcasts information; however, at this time, the information cannot be

updated using the Auto Discovery Manager.

Set Commands

#AUTODISC – Auto Discovery On/Off

Description: This command turns Auto Discovery On or Off.

Syntax: AT#AUTODISC=<value>

AT#AUTODISC? Read or display the current setting (or AT#VAUTODISC, AT#VALL).

Values: 0 – OFF

1 – ON

Default: 1

#AUTODISCTIMER – Auto Discovery Timer

Description: This command sets the Auto Discovery timer.

Syntax: AT#AUTODISCTIMER=<value>

AT#AUTODISCTIMER? Read or display the current setting (or AT#VAUTODISC, AT#VALL).

Values: 0 to 60 seconds

Default: 10

#AUTODISCPORT – Auto Discovery Port

Description: This command sets the Auto Discovery port.

Syntax: AT#AUTODISCPORT=<value>

AT#AUTODISCPORT? Read or display the current setting (or AT#VAUTODISC, AT#VALL).

Values: 0 to 65535

Default: 1020

#AUTODISCHOST – Set Auto Discover Host Name

Description: This command sets the Host Name that will appear in the Auto Discovery Manager.

Syntax: AT#AUTODISCHOST ="<value>"

AT#AUTODISCHOST? Read or display the current setting (or AT#VAUTODISC or AT#VALL).

Values: Alphanumeric ASCII text string up to 120 characters.

Default: MT100SEM

#AUTODISCUSERNAME – Set Auto Discover User Name

Description: This command sets the User Name that will appear in the Auto Discovery Manager.

Syntax: AT#AUTODISCUSERNAME =<setting>

AT#AUTODISCUSERNAME? Read or display the current setting (or AT#VAUTODISC or AT#VALL).

Values: Text string up to 120 characters

Default: No default.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 118 119

Sin comentarios

Multitech MTCMR-E1 Manual de usuario Pagina 58