Multitech MTCMR-E1 Manual de usuario Pagina 72
- Pagina / 119
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 13–WLAN AT Commands
72 Universal IP AT Commands Reference Guide
#WLANPROFILEn=n – Change the WLAN Profile
Description: This command changes the WLANPROFILE.
Syntax: AT#WLANSETPROFILEn=n,"<SSID>",<Security Mode>,<Key Index>,"< Passphrase>"
AT#WLANSETPROFILEn?
Values: 1, 2, 3, 4
Parameters: ssid = up to 32 characters ssid
security mode = 0 (no encryption)
1 (wep64)
2 (wep128)
3 (wpa-psk)
4 (wpa2-psk)
keyindex = 1 to 4 applicable for security option (1-4)
passphrase = ASCII text string of hexadecimal numbers applicable for security modes 1-2.
passphrase = ASCII text string applicable for security modes 3-4.
(10 ASCII text string of hexadecimal numbers for wep64)
(26 ASCII text string of hexadecimal numbers for wep128)
(8-63 ASCII text string for wpa-psk)
(8-63 ASCII text string for wpa2-psk)
Note: Keyindex and passphrase are not applicable for security option (0)
Examples: AT#WLANPROFILE1=1,"MT_NOENC",0 ( for no encryption mode)
AT#WLANPROFILE2=2,"MT_WEP64",1,1,"1234567890" (for wep64 key)
AT#WLANPROFILE3=3,"MT_WEP128",2,1,"12345678901234567890123456"(for wep128)
AT#WLANPROFILE4=4,"MT_WPA",3,1,"12345678" (for WPA psk mode)
AT#WLANPROFILE4=4,"MT_WPA2",4,1,"12345678" (for WPA2 psk mode)
#WLANSCAN – Scan Wireless Networks
Description: Scans all the APs (access points) in the environment and displays information about their
settings and capabilities on HyperTerminal or similar program.
Syntax: AT#WLANSCAN
Example: ESSID: Plan B
BSSID: 00:08:00:C0:30:99
Channel Num: 6
RSSI: -61
Network Type: BSS
Security: No Enc
Capability: 0x1
WLAN Mode: B Mode
#WLANUSEPROFILE – User Profile
Description: Sets and displays the use profile value. If user profile value is set to any value between 1 and 4,
then at the time of user name association, the module first scans for the selected user profile
parameters.
The module must be reset to put the command into effect.
Syntax: AT#WLANUSEPROFILE=<value>
AT#WLANUSEPROFILE? Read or display the current setting.
Values: 1 – 4
- Universal IP 1
- Contacting Multi-Tech 2
- Contents 3
- Part 1 – AT Commands 10
- Set Commands 11
- &D – DTR Option 12
- &S – DSR ON or OFF 12
- <parity> 13
- +IFC – Set Flow Control 14
- +IPR – Set Serial Speed 14
- Display Commands 16
- Syntax: AT#VALL 18
- Responses – MT100SEM-IP only 18
- #RECiADD – Set Email Address 21
- #SMTPPW – Set SMTP Password 23
- #SMTPUN – Set SMTP User Name 23
- #POP3UN – Set POP3 User Name 28
- Display Command 29
- #FTPUN – Set FTP User Name 31
- #FTPPW – Set FTP Password 31
- Chapter 4 – FTP AT Commands 32
- #TCPTXDELAY – Time Delay 36
- Chapter 5 – TCP AT Commands 38
- Chapter 6 – UDP AT Commands 46
- #UDPPORT – UDP Port Number 47
- #UDPDLEMODE – Set DLE Mode 48
- Part 2 – AT Commands for the 53
- Part 3 – AT Commands 60
- Chapter 10 – IP AT Commands 62
- #WLANSSID – SSID of WLAN 70
- Chapter 13–WLAN AT Commands 72
- #WLAN? – WLAN Module 77
- Part 4 – 78
- Chapter 14 – AT Commands 80
- #ISPPW – Set ISP Password 84
- #ISPUN – Set ISP User Name 85
- Part 5 – GPIO AT Commands 91
- About GPIO 92
- Part 6 – AT Commands 95
- #GPSPORT – Set GPS Host Port 96
- - Disable 99
- (Disabled) 99
- GPS Message Syntax 100
- GPS Message Examples 101
- GPS Configuration Examples 101
- Introduction 102
- NMEA Protocol Overview 102
- SUPPORTED MESSAGE LIST 102
- NMEA MESSAGES 103
- GLL – Latitude/Longitude 104
- Part 7 – Appendixes 107
- Response Messages 108
- Error Codes 109
- Commands 110
- Responses 110
- TCP Socket Response Messages 112
- Act as a TCP Client: AT#OTCP 113
Relacionado con productos y manuales para Redes Multitech MTCMR-E1
Redes Multitech MTCMR-G2 Guía de usuario
(56 paginas)
(56 paginas)
Redes Multitech MT2834ZPX Guía de usuario
(15 paginas)
(15 paginas)
Redes Multitech MT56DSU2 El manual del propietario
(39 paginas)
(39 paginas)
Redes Multitech MTCBA-C Guía de usuario
(16 paginas)
(16 paginas)
Redes Multitech RF760 Manual de usuario
(16 paginas)
(16 paginas)
Redes Multitech MTCBA-G-F2 Manual de usuario
(78 paginas)
(78 paginas)
Redes Multitech MTCBA-C Guía de usuario
(58 paginas)
(58 paginas)
Redes Multitech FR2201 Guía de usuario
(85 paginas)
(85 paginas)
Redes Multitech FF200 Guía de usuario
(68 paginas)
(68 paginas)
Redes Multitech MT1932ZDXI Guía de usuario
(177 paginas)
(177 paginas)
Redes Multitech FaxFinder FF840 Guía de usuario
(35 paginas)
(35 paginas)
Redes Multitech GFU19 Guía de usuario
(30 paginas)
(30 paginas)
Redes Multitech MTR-C2 Manual de usuario
(10 paginas)
(10 paginas)
Redes Multitech MTMC8-USB Guía de usuario
(28 paginas)
(28 paginas)
Redes Multitech ISIHI-2U Manual de usuario
(60 paginas)
(60 paginas)
Redes Multitech RF760 Manual de usuario
(12 paginas)
(12 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.062 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales