Multitech MTCMR-E1 Manual de usuario descargar pdf (Pagina 46)

Chapter 6 – UDP AT Commands

46 Universal IP AT Commands Reference Guide

#UDPPACKETMAX – UDP Client Transmit Packet Maximum Size

Description: This parameter determines the maximum packet size the UDP Client will transmit.

This command is for all devices except the SocketWireless Wi-Fi (MT810SWM-IP).

Note: This value cannot be larger than the internal maximum UIP UDP payload size.

Syntax: AT#UDPPACKETMAX=<parameter1>

AT#UDPPACKETMAX? Read or display the current setting.

Values: 0-65535 – the size of the packet in bytes; a setting of 65535 will allow the max packet size

allowed by the UIP stack

Responses: \r\n#UDPPACKETMAX: VALUE\r\n

\r\nOK\r\n

\r\nERROR\r\n

Examples: send: AT#UDPPACKETMAX=300\r

reply: \r\nOK\r\n

send: AT#UDPPACKETMAX?\r

reply: \r\n#UDPPACKETMAX: 300\r\n

reply: \r\nOK\r\n

#UDPINACTIVITYTIMER – UDP Client Inactivity Timeout Value

Description: This parameter determines the inactivity time in seconds as to when a socket connection will

automatically disconnect.

This command is for all devices except the SocketWireless Wi-Fi (MT810SWM-IP).

Note: Data transmission from either the remote or local side will reset the internal timer to

the #UDPINACTIVITYTIMER value.

Syntax: AT#UDPINACTIVITYTIMER=<parameter1>

Values: 0-65535 – the time in seconds of inactivity before a socket will automatically disconnect. A

setting of 0 will disable the function.

Responses: \r\n#UDPINACTIVITYTIMER: VALUE1\r\n

\r\nOK\r\n

\r\nERROR\r\n

Example(s): send: AT#UDPINACTIVITYTIMER=100\r

reply: \r\nOK\r\n

send: AT#UDPINACTIVITYTIMER?\r

reply: \r\n#UDPINACTIVITYTIMER: 100\r\n

reply: \r\nOK\r\n

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 118 119

Sin comentarios

Multitech MTCMR-E1 Manual de usuario Pagina 46