Multitech MTCMR-E1 Manual de usuario descargar pdf (Pagina 73)

Part 3 – AT Commands Wi-Fi Devices Chapter 13 – WLAN AT Commands for the SocketWireless Wi-Fi

Universal IP AT Commands Reference Guide 73

#WLANGETRSSI – Received Signal Strength

Description: This command displays the current received signal strength.

Syntax: AT#WLANGETRSSI

Values: The response returns a signal strength value from -256 dBm through -1 dBm. A value of 0 equals

no connection to an access point.

Example: AT#WLANGETRSSI

RSSI : 0

#WLANACTIVATE – Move Module out of Power Save

Description: This command moves the module out of Power Save during an active connection. See

#WLANDOZE

The module must be reset to put the command into effect.

Syntax: AT#WLANACTIVATE

Values: n/a

#WLANROAM – Enable/Disable Roaming

Description: This command enables/disables automatic roaming of the module when the wireless connection

is lost by the Access Point.

The module must be reset to put the command into effect.

Syntax: AT#WLANROAM

Values: 0 - Disable Auto Roam

1 - Enable Auto Roam

Default: 1

#WEP64KEY – Keys for WEP64 Security Mode

Description: Sets keys for WEP64 Security mode.

The module must be reset to put the command into effect.

Syntax: AT#WEP64KEYn ="<value>"

AT#NWEP64KEYn? Read or display the current setting.

Values: ASCII text string of 10 hexadecimal characters. Valid characters include 0-9, a-f or A-F

Default: 6162636465

#WEP128KEY – Keys for WEP128 Security Mode

Description: Sets keys for WEP128 Security mode.

Note: he module must be reset to put the command into effect.

Syntax: AT#WEP128KEYn ="<value>"

AT#WEP128KEYn? Read or display the current setting.

Values: ASCII text string of 26 hexadecimal characters; valid characters include: 0-9, a-f or A-F

Default: 12345678901234567890123456

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 118 119

Sin comentarios

Multitech MTCMR-E1 Manual de usuario Pagina 73