Multitech MultiConnect Adapter Guía de usuario descargar pdf (Pagina 134)

Chapter 12 – FTP Client

Command Line Interface and Application Examples for Multi-Tech Systems, Inc. IP Modules (S000368F) 134

Scenario 18 – Appending to a File in the FTP

Server

This scenario describes how to send a file to the FTP server:

• With Automatic Authentication enabled by specifying a few authentication details: IP address of the device

and valid login name.

• Data connection in ACTIVE mode.

Description

The IP module establishes the control connection to the specified FTP server, automatically

checks for the configured values, and logs into the FTP server. If the user is valid, the IP

module prompts the host device to enter the Password as below:

Password: **** <CR>

If successfully logged in, the IP module sends a message and prompts the host device to

enter Filename and Filesize and sends a message as shown here:

Connected

Filename: filename <CR>

Filesize: filesize <CR>

Enter data. Enter Ctrl+CDZ with 3 seconds delay to abort session

------ File Transfer ----

To abort FTP session: Hold down the Ctrl key and type letters CDZ all in row with no spaces.

When the specified filesize is reached, the FTP session responds with the OK message.

By default the data connection is in active mode. The client sets the data transfer mode as

‘BINARY/IMAGE’ during the file transfer.

If the –m option is specified, it prompts the user for the next transaction or to quit. If the user

selects to do another transaction, then he is prompted to enter the Filename again. In this

case, the filename entered for the previous transaction will not be considered. The user

should specify the whole path. The directory specified using “Set ftp directory xxx” or the

filename specified using “set ftp filename xxx” or filesize specified using “set ftp filesize xxx”

will not be considered.

Note: If '-p' is specified in the command, the data connection will be in passive mode.

Configuration

set ftp machine <ip-address/host-name> login <user-name>

Command

ftp -a [-d <directory>] [-n <filename>] [-s <filesize>] [-p] [-m] <ip-address/host-name>

Result Response

OK: FTP session closed

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 153 154

Sin comentarios

Multitech MultiConnect Adapter Guía de usuario Pagina 134