Multitech MultiConnect Adapter Guía de usuario Pagina 142
- Pagina / 154
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 14 – Dynamic DNS Client
Command Line Interface and Application Examples for Multi-Tech Systems, Inc. IP Modules (S000368F) 142
Chapter 14 – Dynamic DNS Client
Introduction
The Dynamic DNS (DDNS) client is used to update the IP address of the IP module in a DDNS server for the
configured domain name whenever the ip-address changes, thus leaving the domain name pointing to the current IP
address of the IP module all the time.
Important: DNS must be enabled in order to enable DDNS client.
Note: The DDNS server mentioned in this chapter refers to the DYNDNS server.
DDNS Client Features
• Supports updating the IP address for the configured domain
• Supports dynamic DNS and custom DNS
• Supports restricted updating; i.e., updating only when the IP address changes
• Supports the use of a wild card; i.e., allows *.yourhost.dyndns.org to point to yourhost.dyndns.org
• Supports updating the correct IP address of modules behind firewalls
Registering a Domain
Before using a DDNS client, register a domain name in the DDNS server. To do this, create an account in the DDNS
server. Once the account is created, there are two services that can be used in the server. They are
• Dynamic Service: In dynamic service, you can register a host name for any of the domain names offered by
the service. Dynamic service provides both paid and free service.
The following is a list of domains offered by www.dyndns.org server for Dynamic DNS Service
ath.cx
blogdns.com
blogdns.net
blogdns.org
dnsalias.com
dnsalias.net
dnsalias.org
dynalias.com
dynalias.net
dynalias.org
dyndns.biz
dyndns.info
dyndns.org
dyndns.tv
dyndns.ws
game-host.org
game-server.cc
gotdns.com
gotdns.org
homedns.org
homeftp.net
homeftp.org
homeip.net
homelinux.com
homelinux.net
homelinux.org
homeunix.com
homeunix.net
homeunix.org
is-a-geek.com
is-a-geek.net
is-a-geek.org
isa-geek.com
isa-geek.net
isa-geek.org
kicks-ass.net
kicks-ass.org
merseine.nu
mine.nu
myphotos.cc
serveftp.net
serveftp.org
shacknet.nu
• Custom service: In custom service, you can register a zone; i.e., create a domain name in any of the TLDs
(Top Level Domains) offered by the DDNS server.
Operations Performed by the DDNS Client
The two main operations done by the DDNS client are:
• Sends a request to a checkip sever to get the ip-address of the ipmodule. This is useful because IP address
of the IP module behind a firewall may not be apparent.
• Updating the IP address in the DDNS server, if needed.
Note: The DDNS server and the name of the server that provides checkip service has to be configured through the
CLI commands.
Commands to Enable/Disable DDNS Client
The host/serial device can use the command below to enable/disable DDNS Client
# set ip ddns <enable/disable>
The DDNS Client will be enabled/disabled only after a Save is issued.
- Multi-Tech IP Connectivity 1
- Revision History 3
- Table of Contents 4
- Chapter 1 – Managing and 7
- Configuring IP Modules 7
- Chapter 2 – IP Command Line 8
- Interface (CLI) 8
- General Setup Commands 9
- • Hardware information 14
- • System Uptime 14
- • Memory Utilization 14
- • Flash Memory Map 14
- IP Setup Commands 15
- Serial Setup Commands 20
- PPP Setup Commands 37
- HTTP Server Commands 44
- SMTP Client – Commands 46
- POP3 Client Commands 49
- FTP Client Commands 52
- SNTP Client – Commands 54
- 2. Too few arguments 55
- Commands 61
- Region Codes Using the CLI 64
- Chapter 4 – Scenario Setup 65
- IP Modes of Operation 66
- Connectivity Using Dialout 68
- Scenario 1 – Manual Dialout 71
- Scenario 2 – Auto Dialout 72
- Dialout Serial s1 74
- Functionality 75
- Telnet Dial-in Features 76
- UDP Dial-in Features 76
- Commands for Auto-Dialin 77
- Serial Tunneling 81
- Auto-Dial-in Using UDP 84
- NMEA Filtering 85
- Network Processor 90
- PPP Configuration 92
- Wakeup-on Call Feature 94
- Show Commands 94
- Connect Type 95
- Chapter 9 – HTTP Server 96
- Setup and Configuration 97
- Configuration Modes 98
- Host Configuration Mode 98
- 2. The Embedded HTML Page 100
- 3. CGI Scripts 100
- Technical Information 102
- Chapter 10 – SMTP Client 103
- Command Prompt 104
- Interactive Mode 105
- Chapter 11 – POP3 Client 112
- Error Messages 117
- Email with Attachment 118
- Chapter 12 – FTP Client 119
- Prerequisites 120
- About Read and Store 139
- Chapter 13 – SNTP Client 140
- Introduction 142
- Module Acting as Client 146
- Module Acting as Server 147
- .....55 153
- ..................55 154
- ..........................54 154
Relacionado con productos y manuales para Redes Multitech MultiConnect Adapter
Redes Multitech MT5656SMI Guía de usuario
(107 paginas)
(107 paginas)
Redes Multitech GFU19 Manual de usuario
(226 paginas)
(226 paginas)
Redes Multitech MTCMR-H Guía de usuario
(27 paginas)
(27 paginas)
Redes Multitech MT2834ZDXI Manual de usuario
(36 paginas)
(36 paginas)
Redes Multitech FF110 Guía de usuario
(167 paginas)
(167 paginas)
Redes Multitech MT128STZLX Manual de usuario
(17 paginas)
(17 paginas)
Redes Multitech FaxFinder FF840 Especificaciones
(99 paginas)
(99 paginas)
Redes Multitech RF760 Manual de usuario
(39 paginas)
(39 paginas)
Redes Multitech MMH900 Guía de usuario
(200 paginas)
(200 paginas)
Redes Multitech RouteFinder MTASR3 Manual de usuario
(33 paginas)
(33 paginas)
Redes Multitech MVP200 Guía de usuario
(44 paginas)
(44 paginas)
Redes Multitech MA30120 Guía de usuario
(29 paginas)
(29 paginas)
Redes Multitech MTCMR-G2 Guía de usuario
(29 paginas)
(29 paginas)
Redes Multitech FaxFinder FF840 Manual de usuario
(24 paginas)
(24 paginas)
Redes Multitech MTPSR1-202ST Guía de usuario
(104 paginas)
(104 paginas)
Redes Multitech MT5634ZBAV.90 Manual de usuario
(13 paginas)
(13 paginas)
Redes Multitech MultiVOIP 100 MVP120 Guía de usuario
(89 paginas)
(89 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.068 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales