Multitech MultiConnect Adapter Guía de usuario descargar pdf (Pagina 92)

Chapter 8 – Point-to-Point Protocol

Command Line Interface and Application Examples for Multi-Tech Systems, Inc. IP Modules (S000368F) 92

Prerequisites to Establishing a PPP Session

Before establishing a PPP session, users should be added to the user database. The user name and password

supplied by the remote peer will be authenticated using the local database.

The following sections describe the commands to add / delete user names and passwords to the local database.

Adding Users and Passwords

Upon successful execution of this command, the IP module will return an OK or an error message.

Command: # user add <username> [password]

Example: # user add user1 user1

(Or)

# user add user1

Setting Passwords

Upon successful execution of this command, the IP module will return an OK or an error message.

Command: # user password <username> <password>

Example: # user password user1 user1

Deleting Users

Upon successful execution of this command, the IP module will return an OK or an error message.

Command: # user delete <username>

# user delete user1

PPP Configuration

PPP Interface Related Parameters

• Enable PPP

• Enable/Disable Authentication and Authentication Type

• Configure user name/password for remote peer to authenticate

• Configure IPCP mode

• Configure local and remote IP addresses

• Enabling/Disabling compression

• Configure the compression algorithm

• Enabling/Disabling PPP Trace

• Enabling/Disabling Ping Keep-alive

• Configure Ping Keep-alive parameters

• Enabling/Disabling Wakeup-on call

• Configure Wakeup-on Call parameters

Serial Interface Related Parameters

• Configure the Connect Type

• Configure the modem settings

• Configure the dialing trigger mode

• Configure init-strings for Wakeup-on Call feature

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 153 154

Sin comentarios

Multitech MultiConnect Adapter Guía de usuario Pagina 92