Multitech MultiConnect Adapter Guía de usuario Pagina 20
- Pagina / 154
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 2 – Command Line Interface (CLI)
Command Line Interface and Application Examples for Multi-Tech Systems, Inc. IP Modules (S000368F) 20
Serial Commands – Setup
Serial Setup Commands
Command Syntax set serial auto-dialin <enable/disable>
Description
This command globally enables serial auto dial-in support.
Notes:
• This feature provides a dial-in session to the serial device connected to s0
through the IP-enabled modem port (s1)
• Also, dial-in can be done only after PPP is up and has acquired an IP address on
the modem's (s1) port.
Default Value
Disabled
Success
OK
Error 1. Too few arguments
“Usage: set serial auto-dialin <enable/disable>
Type ‘set serial auto-dialin ?’ for more information”
2. Invalid string
error: Invalid string
Type ‘set serial auto-dialin ?’ for more information
Command Syntax set serial <serial-interface> escape-monitor <enable/disable>
Description
Sets a ‘‘monitor’’ flag that enables/disables the scanning of escape sequence.
Default Value
Enable
Success
OK
Error 1. Too few arguments
“Usage: set serial s0/s1 escape-monitor <enable/disable>
Type ‘set serial s0/s1escape-monitor ?’ for more information”
2. Multiple matches
escape-monitor
escape-string
3. Invalid string
error: Invalid string
Type ‘set serial s0/s1 escape-monitor ?’ for more information”
Command Syntax set serial <serial-interface> escape-string <string>
Description
The Telnet client scans for this escape sequence and transfers the control to the
command parser.
By default, the Telnet client scans for “+++inet”.
Default Value
+++ inet<serial-interface>
Success
OK
Error 1. Too few arguments
“Usage: set serial s0/s1 escape-string <string>
Type ‘set serial s0/s1 escape-string ?’ for more information”
2. Multiple matches
escape-monitor
escape-string
Command Syntax hangup [serial interface]
Valid serial interface – Modem port s1
Description
When this command is issued, the established live link is brought down.
This command is only valid only for modem port (s1)
Default Value
-
Success If physical link is brought down, OK and
Physical link is successfully brought down messages are given
Error 1. Too few arguments
"Usage: hangup [s1]
Type 'hangup [s1] ?' for more information"
2. “error: Link could not be brought down”
message is given when link could not be brought down
- Multi-Tech IP Connectivity 1
- Revision History 3
- Table of Contents 4
- Chapter 1 – Managing and 7
- Configuring IP Modules 7
- Chapter 2 – IP Command Line 8
- Interface (CLI) 8
- General Setup Commands 9
- • Hardware information 14
- • System Uptime 14
- • Memory Utilization 14
- • Flash Memory Map 14
- IP Setup Commands 15
- Serial Setup Commands 20
- PPP Setup Commands 37
- HTTP Server Commands 44
- SMTP Client – Commands 46
- POP3 Client Commands 49
- FTP Client Commands 52
- SNTP Client – Commands 54
- 2. Too few arguments 55
- Commands 61
- Region Codes Using the CLI 64
- Chapter 4 – Scenario Setup 65
- IP Modes of Operation 66
- Connectivity Using Dialout 68
- Scenario 1 – Manual Dialout 71
- Scenario 2 – Auto Dialout 72
- Dialout Serial s1 74
- Functionality 75
- Telnet Dial-in Features 76
- UDP Dial-in Features 76
- Commands for Auto-Dialin 77
- Serial Tunneling 81
- Auto-Dial-in Using UDP 84
- NMEA Filtering 85
- Network Processor 90
- PPP Configuration 92
- Wakeup-on Call Feature 94
- Show Commands 94
- Connect Type 95
- Chapter 9 – HTTP Server 96
- Setup and Configuration 97
- Configuration Modes 98
- Host Configuration Mode 98
- 2. The Embedded HTML Page 100
- 3. CGI Scripts 100
- Technical Information 102
- Chapter 10 – SMTP Client 103
- Command Prompt 104
- Interactive Mode 105
- Chapter 11 – POP3 Client 112
- Error Messages 117
- Email with Attachment 118
- Chapter 12 – FTP Client 119
- Prerequisites 120
- About Read and Store 139
- Chapter 13 – SNTP Client 140
- Introduction 142
- Module Acting as Client 146
- Module Acting as Server 147
- .....55 153
- ..................55 154
- ..........................54 154
Relacionado con productos y manuales para Redes Multitech MultiConnect Adapter
Redes Multitech MT5656SMI Guía de usuario
(107 paginas)
(107 paginas)
Redes Multitech GFU19 Manual de usuario
(226 paginas)
(226 paginas)
Redes Multitech MTCMR-H Guía de usuario
(27 paginas)
(27 paginas)
Redes Multitech MT2834ZDXI Manual de usuario
(36 paginas)
(36 paginas)
Redes Multitech FF110 Guía de usuario
(167 paginas)
(167 paginas)
Redes Multitech MT128STZLX Manual de usuario
(17 paginas)
(17 paginas)
Redes Multitech FaxFinder FF840 Especificaciones
(99 paginas)
(99 paginas)
Redes Multitech RF760 Manual de usuario
(39 paginas)
(39 paginas)
Redes Multitech MMH900 Guía de usuario
(200 paginas)
(200 paginas)
Redes Multitech RouteFinder MTASR3 Manual de usuario
(33 paginas)
(33 paginas)
Redes Multitech MVP200 Guía de usuario
(44 paginas)
(44 paginas)
Redes Multitech MA30120 Guía de usuario
(29 paginas)
(29 paginas)
Redes Multitech MTCMR-G2 Guía de usuario
(29 paginas)
(29 paginas)
Redes Multitech FaxFinder FF840 Manual de usuario
(24 paginas)
(24 paginas)
Redes Multitech MTPSR1-202ST Guía de usuario
(104 paginas)
(104 paginas)
Redes Multitech MT5634ZBAV.90 Manual de usuario
(13 paginas)
(13 paginas)
Redes Multitech MultiVOIP 100 MVP120 Guía de usuario
(89 paginas)
(89 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.104 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales