Multitech MultiConnect Adapter Guía de usuario descargar pdf (Pagina 70)

Chapter 5 – Network-to-Serial Connectivity Using Dialout

Command Line Interface and Application Examples for Multi-Tech Systems, Inc. IP Modules (S000368F) 70

• Set the Data bits for the serial port s0 to be taken for a Dialout session.

# set serial s0 data-bits <7/8>

• Set the Stop bits for the serial port s0 to be taken for a Dialout session.

# set serial s0 stop-bits <1/1.5/2>

• Set the Flow control for the serial port s1 to be taken for a PPP session

# set serial s1 flow-control <rts-cts/none>

• Set the Parity for the serial port s1 to be taken for a PPP session

# set serial s1 parity <even/odd/none>

• Set the Data bits for the serial port s1 to be taken for a PPP session

# set serial s1 data-bits <7/8>

• Set the Stop bits for the serial port s1 to be taken for a PPP session

# set serial s1 stop-bits <1/1.5/2>

UDP Auto-Dialout Optional Configuration Settings

The following details are optional configurations:

• Enable/Disable the Terminating Dialout Session using Terminate string

# set ip udp udp-terminate-monitor <enable/disable>

• Set the Terminate-Monitor-String to Terminate the Dialout Session.

# set ip udp udp-terminate-string "+++inet"

• Enable/Disable the Terminating Dialout Session using Inactivity Timeout

# set ip udp udp-inactivity <enable/disable>

• Set the Inactivity Timeout to Terminate the Dialout Session.

# set ip udp udp-inactivity-timeout 300

• Set the Baud rate for the serial port s0 to be taken for a Dialout session.

# set serial s0 baud-rate <Baud-rate>

• Set the Flow control for the serial port s0 to be taken for a Dialout session.

# set serial s0 flow-control <rts-cts/none>

• Set the Parity for the serial port s0 to be taken for a Dialout session.

# set serial s0 parity <even/odd/none>