Multitech MultiConnect Adapter Guía de usuario descargar pdf (Pagina 97)

Chapter 9 – HTTP Server

Command Line Interface and Application Examples for Multi-Tech Systems, Inc. IP Modules (S000368F) 97

Setup and Configuration

Prerequisite for Enabling the HTTP Server

Before being able to access the IP module or the serial host through the Web browser, the HTTP support on the IP

module needs to be enabled and configured.

The following configuration is mandatory and can be configured using CLI either through serial or through Telnet.

Mandatory Setup for HTTP Server

set ip http enable

Successful execution of this command starts the HTTP daemon thus enabling the HTTP server.

set ip http port <port-number>

By default the HTTP server listens on port 80. However, the default port number can be changed.

set ip http-page <default/serial>

This command basically decides the Web page that will be displayed when the IP module is accessed

through the browser.

Note: The default Index.htm is displayed when

• The http-page is set to default and

• The IP module is accessed through the Web.

The default HTML page contains two links, one for the host configuration and another for the IP module configuration.

Both these modes are described in subsequent sections.

Index.htm (Default Index Page)

In the event that the http-page is set to serial, the http-s0.HTML Web page will display upon accessing the IP

module through the browser. (The Index.htm will not be accessible).

The http-s0.HTML Web page can be replaced by the OEM's Home Page specific to the product. More details

regarding design conventions, procedure for uploading, and hosting this page are explained later in this chapter.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 153 154

Sin comentarios

Multitech MultiConnect Adapter Guía de usuario Pagina 97